Article Archive
Porcelain slab vs quartz: where each worktop fails
Both are sold as stone that will not stain. The difference is the binder: fired clay against polyester resin. That one fact decides heat, sunlight, seams and repair.
11 min read · Reviewed 2026-11-05

Thermal break aluminium: what the strip buys you
10 min read · A thermal break is a structural separation, not a coating. Strip width, chamber design and the glass around it decide whether the window is warm or merely expensive.

Kitchen cabinet carcass: plywood, particleboard or MDF
10 min read · The board inside the box decides moisture tolerance, screw holding and formaldehyde risk. Specify it before the quote hides it.

Hotel FF&E sourcing: from schedule to installed room
10 min read · The schedule is the product. What a usable FF&E schedule holds, how a mock-up room is signed off, and where hotel fit-outs lose weeks.

LCL or FCL: the container maths before you book it
9 min read · The LCL quote looks smaller because it prices a slice of a box. Add CFS, documentation and handling, and FCL wins sooner than the rate implies.

Sintered stone vs porcelain: how to compare two quotes
11 min read · The name on a slab quote decides who fabricates it. What the standard, the test report and the slab weight can actually prove.

Porcelain slab inspection: what a site visit can prove
11 min read · A warehouse visit confirms identity, dimensions and packing. It cannot confirm absorption, strength, or the batch that actually ships.

Shipping porcelain slabs: packing that survives transit
11 min read · Breakage is decided in the crate, not at the factory. Specify the A-frame, edge protection and the inspection record before the slab leaves Foshan.

Outdoor porcelain paving: thickness, slip and drainage
11 min read · A 6 mm interior panel is not a paver. Thickness, water path and wet grip decide what survives a terrace, and what a quote has to prove.

Porcelain slab batch consistency: what to hold back
10 min read · Two slabs from one order can arrive a shade apart. Colour, calibre and two retained offcuts make that visible before it is bonded to a cabinet.

Porcelain wall cladding: what holds a 6 mm panel
11 min read · A 6 mm panel weighs about 14 kg/m² and has little stiffness. Substrate, adhesive and joints decide whether a wall reads as one surface.

Tile slip ratings: R9 to R13 and what they miss
11 min read · A ramp class and a floor test answer different questions. Read the label by its method, and a wet floor stops being a post-handover surprise.

Rectified tile vs non-rectified: the joint decides
10 min read · A 2 mm joint is a system, not a tile feature: calibrated edge, flat bed, right adhesive. What rectified promises, and where it fails on site.

Tile shade variation: V1 to V4 and batch matching
11 min read · The V label describes one firing, not your next delivery. How to specify shade, size sort and a reserve, and what to do when tiles arrive darker.

Large format tile installation: the 1 mm lippage rule
11 min read · Lippage is decided before the first tile is bedded: substrate flatness, adhesive coverage, joint width. What a 1 mm step proves and what it hides.