In short

A Lacey Act declaration is the US customs filing, required under the 2008 amendments at 16 U.S.C. 3371–3378, that identifies the plant material in an imported product: the scientific name of each species, the country of harvest, the value and the plant quantity in metric units. The importer of record, or a broker with power of attorney, files it through CBP's ACE system or APHIS's LAWGS portal before arrival.

The declaration does not change the duty. It changes what you must know before paying a deposit. A sample can look right, the invoice can be accurate and the carton correctly marked while the species line is wrong, and that error surfaces at the port.

01The form asks four questions, and the invoice answers none

Every declaration line carries four facts about the plant. A furniture invoice carries none of them: it describes a product and a price.

APHIS began Phase VII on 1 December 2024, extending the declaration to the remaining listed plant-product codes, furniture among them. A declaration is needed where goods contain plant material, sit under a listed HTS code and enter as a formal entry, generally $2,500 or more; informal entries and in-bond movements are outside it. Only metric quantities are accepted.

The declaration fields compared with what a furniture proforma normally states. Field list from the APHIS requirements page, checked on 5 November 2026.
Field What the filing needs What a proforma gives What goes wrong
Scientific nameGenus and species per material"Oak", "solid wood"Trade name cannot be matched
Harvest countryWhere each plant was taken"Made in China"Manufacture is not harvest
Quantitykg, m³ or m²"240 chairs"Counts are rejected
ValueValue of the product lineOne FOB totalSpecies lines cannot be split
HTS code10-digit listed code"furniture"No code, no declaration
ImporterImporter of recordBuyer's trading nameLiable party not named

De minimis is narrower than it looks: plant material must be no more than 5% of the weight of the individual unit, and no more than 2.9 kg across the entry line.

Decision rule: no proforma is complete until it carries a species, a harvest country and a metric quantity for every plant component.

02A trade name is a marketing word, and the form wants a species

The form wants genus and species in Latin, the only name that follows a plant across borders. "Oak" is not a species: Quercus alba, the American white oak, and Quercus robur, the European oak, are different plants from different continents and become separate lines.

The catalogue repeats the problem. Walnut is Juglans nigra from North America or Juglans regia from China and Europe. Rubberwood has a clean name, Hevea brasiliensis. "Mixed hardwood" describes whatever the mill had that week.

The name also decides whether a permit sits in front of the declaration. A species listed in a CITES appendix is a protected product, and the exemptions that normally apply to cultivars and small quantities do not apply to it.

RFQ clause: "For each component, state genus, species, harvest country, mill name and region, net mass in kg, and the document that evidences it. Where the species is unknown, list every species that may have been used." That is what APHIS asks for when the source varies.

Decision rule: of two suppliers quoting the same solid-oak table, the one who can name the species and the mill is the one whose price can be declared.

Catalogue reference: sourcing, supplier documents and shipping coordination — models, dimensions and finishes for the directions discussed above.

03Harvest country follows the log, not the factory address

Chinese factories buy timber from everywhere: birch from Russia, oak and walnut from North America, sapele from West Africa, rubberwood from Southeast Asia. The cabinet is Chinese; the plant inside it is not.

Tariff origin asks where the goods were substantially transformed, and a certificate of origin answers it. The declaration asks where the tree was harvested. One document does not answer both.

Where the country varies, APHIS asks for every country the plant may have come from. That is permitted, and it says the chain is not traced. Trace to the mill instead: its invoice naming species and region, the harvest permit or licence, and the transport document from forest to mill. Most factories can produce a purchase contract with a timber trader, but the trader is not the mill, and the mill is where the species name is fixed.

Decision rule: ask for the mill and the region before the country. A supplier who can name only the country is guessing, and the guess becomes your filing.

04Panels are plant products, and packing wood follows another rule

A lacquered MDF sideboard is still a plant product. APHIS treats MDF, HDF, OSB, particleboard, plywood and paper as plant products, so products on its schedule that contain them need a declaration.

The composite relief is narrower than suppliers assume. SPECIAL COMPOSITE may replace a scientific name only where small fibres of more than one plant are mixed and bonded and the species cannot be identified after due care. It cannot cover thin plies of solid wood, so an oak-faced plywood is not composite.

Packing is a separate regime. The statute excludes plants used only to support, protect or carry another item, so crates, pallets and dunnage are outside the declaration. They are not outside ISPM 15, which requires treatment and a mark applied to the wood. New crates imported as merchandise under HTSUS 4415 do need a declaration.

Four wood-related controls compared by scope, information demanded and the party that files. Thresholds and phase dates change; confirm against the current APHIS schedule.
Instrument Covers Demands Filed by
Lacey declarationPlant material in the productSpecies, harvest country, value, kg or m³Importer of record
ISPM 15Solid wood packingTreatment and a mark on the woodPacker
EU due diligenceTimber on the EU marketPlot geolocation and a statementEU operator
CITES permitListed speciesPermit before entryImporter

These run in parallel. Satisfying one does not satisfy another, and EU due diligence data is not a substitute for the declaration fields.

Decision rule: if the product contains a panel, ask for the panel supplier's species list too.

05Quantity is a metric measure of the plant, not a count of cartons

The form will not take a piece count. Quantity means the plant material, in grams, kilograms, cubic metres or square metres.

It is not the container figure either. A 40HQ is 76.4 m³ nominal and about 65–68 m³ usable, with 26–28 t of payload. The verified gross mass under SOLAS includes crates and dunnage; the declaration quantity is the plant alone. Three numbers, three documents.

Build it from the bill of materials: net timber mass per unit, multiplied by the invoice quantity, split by species, checked against the packing-list weight. If the species lines exceed the net weight, a component is counted twice.

Value splits the same way. The lines have to add up to the invoice line they sit under, so a primary species carrying the whole FOB price and a veneer entered at zero is a mismatch the broker will query.

Decision rule: require net plant mass per unit by species, and reconcile the lines to both invoice value and packing weight before filing.

06Due care is a file, not a sentence in the purchase order

The obligation is due care that the plant was legally harvested, shown by records you can produce. A warranty clause is a contract remedy, not a file.

  1. Questionnaire with the RFQ: component, genus, species, harvest country, mill, net mass.
  2. Mill documents: invoice, harvest permit or licence, forest-to-mill transport.
  3. Check the binomial in a taxonomy database, and the species' range against the country.
  4. Screen against the CITES appendices; a listed species needs a permit first.
  5. Keep the file five years from entry, indexed by HTS line and container.

FSC or PEFC chain of custody is evidence of how material moved; it does not file the declaration and may not give species and country per line. A certificate number on the invoice is not a declaration, and it will not answer a broker asking which species the drawer sides are.

Decision rule: a file that cannot be handed to a broker in ten minutes is not a file.

07Write the clause, then check the entry summary

The purchase order is the only document the factory reads before production. Five clauses carry the weight.

Five purchase-order clauses for a wood product entering the United States, with the failure each one addresses.
Clause Wording Prevents
Species list"Each component: genus, species, harvest country, mill, net kg, before production."A trade name at the broker
Filing"Declaration data 14 days before departure; importer of record files."A gap at the port
Consistency"Data must match invoice, HTS code, packing weight and container number."A hold
Correction"Seller bears amendment, storage, redelivery or export costs."Absorbing a supplier error
Records"Mill documents retained five years, copies on request."A file produced too late

Adapt the wording to the Incoterm. Under DAP the buyer is importer of record; under DDP the seller is, and the buyer should still obtain a copy of the filed declaration.

After entry, reconcile: the summary should show the same HTS lines, species count and value split. A few kilograms is rounding; a missing panel line is a gap an audit can find. Ask for the filed declaration and the entry summary as documents, not as a screenshot of a portal.

CBP can hold the entry while APHIS reviews it, and the goods may be redelivered, exported or forfeited. Penalties attach to the importer of record, so name that party before the deposit. Duty under the HTS code, including Section 301, is assessed separately.

Decision rule: hold a payment tranche until the broker confirms the entry summary matches the declaration.

What your RFQ should state

  1. For every component: genus, species, harvest country, mill name and region, and net plant mass in kg or m³.
  2. The 10-digit HTS code per item, checked against the APHIS Lacey schedule before the order.
  3. Which party is importer of record, and whether the entry is formal or informal.
  4. The declaration schedule delivered 14 days before departure, as a document rather than a promise.
  5. Every species and country that may have been used, where the exact source is unknown.
  6. Panel species and panel supplier, with the composite designation only where species cannot be identified.
  7. ISPM 15 treatment and the mark on every crate and pallet, photographed before loading.
  8. The five-year retention obligation, with mill documents held by the party who can produce them.

Where this guidance stops

Questions buyers ask

Is a Lacey Act declaration required for wooden furniture?

Usually yes, if the goods contain plant material, sit under an APHIS-listed HTS code and enter as a formal entry. APHIS began Phase VII on 1 December 2024, which extended the declaration to the remaining listed plant-product codes, furniture among them. Informal entries, goods moving in bond and de minimis quantities fall outside it. Check the code and the entry type before assuming either way.

Can PPQ Form 505 still be filed on paper?

Rarely. ACE is the primary filing route, and LAWGS covers foreign trade zones and bulk uploads. APHIS keeps a paper form only as a fallback, and asks importers who missed the deadline to contact its Lacey Act team before using it. A supplier who offers to send Form 505 with the shipping documents has not filed a declaration.

What if the factory does not know the species?

Then the declaration must name every species that may have been used, and every country it may have come from. That is permitted, but it widens your exposure and is hard to present as due care. A factory buying timber every week can usually obtain the mill's species list. Ask before production, not after the container is booked.

How is the country of harvest declared for MDF or plywood?

For composite panels, the country where the fibre or veneer was harvested, not where the panel was pressed. APHIS allows the SPECIAL COMPOSITE designation where the species genuinely cannot be identified after due care, but not for thin plies of solid wood. If the panel mill names its fibre sources, declare those species and countries.

Does FSC certification replace the declaration?

No. Chain-of-custody certification is evidence of how material moved through the supply chain. It does not file the declaration and does not necessarily give the species and harvest country for each line. It supports a due care file and is worth keeping, but the four declaration fields still have to be answered.

Is ISPM 15 the same as the Lacey declaration?

No, and they cover different material. ISPM 15 applies to solid wood packing such as crates, pallets and dunnage, and requires heat treatment or fumigation plus a mark applied to the wood. The Lacey declaration covers the plant material in the product. Packing used only to carry goods is outside the declaration but still needs the mark.

What happens if the declaration is wrong?

The entry can be held while APHIS and CBP review it, and the goods may be subject to redelivery, export or forfeiture. Civil and criminal penalties attach to the importer of record, which is why the named importer matters. A filed declaration can be corrected, and the correction belongs in the due care file. Duty is assessed separately under the HTS code.

Sources

  1. File a Lacey Act Declaration — USDA Animal and Plant Health Inspection Service
  2. Lacey Act Declaration Requirements — USDA Animal and Plant Health Inspection Service
  3. ISPM 15 — Regulation of wood packaging material in international trade — International Plant Protection Convention
  4. Harmonized Tariff Schedule of the United States — US International Trade Commission
  5. Regulation on deforestation-free products (EUDR) — European Commission
  6. Importing into the United States — US Customs and Border Protection
  7. SOLAS verified gross mass (VGM) of a packed container — International Maritime Organization
  8. Incoterms 2020 rules — International Chamber of Commerce

Pages related to this guide

How this guide was checked

FS

Foshan Supply editorial team · Catalogue indexMethodology

Written in Foshan and reviewed against the catalogue and public standards on 2026-11-05. This page is a buying guide, not a quotation or a warranty. How we work.

How to cite this page: Foshan Supply, “Lacey Act declaration: four facts your invoice lacks”, 2026-11-05, https://foshansupply.com/blog/lacey-act/