In short
- The EUDR makes the EU importer responsible for a due diligence statement, while the species, plot coordinates and harvest date must come from the factory that made the goods.
- Wooden furniture is in scope by CN code: seats in 9401, furniture in 9403, plus panels and parts. Upholstery fabric and foam are not listed; the timber frame still counts.
- Application is 30 December 2026 for medium and large operators and 30 June 2027 for micro and small ones. Collect the data at order stage, not at booking.
The EUDR is Regulation (EU) 2023/1115. It permits seven commodities, wood among them, and the products made from them to be placed on the EU market only if they are deforestation-free, legally produced and covered by a due diligence statement. Deforestation-free means the land was not cleared after 31 December 2020; legally produced means the harvest obeyed the law of the country of origin.
For a Foshan furniture order the duty inverts the usual paperwork. The EU importer holds the obligation, while the evidence sits in a factory office, a sawmill ledger and a forest compartment nobody has been asked to describe. A statement cannot be written from a catalogue photo, and a container of casegoods carries wood from more than one forest.
01The importer files the statement; the factory holds the evidence
The duty follows the first placement on the EU market. After the December 2025 amendment, the operator who first places an in-scope product on that market files the statement, and businesses further down the chain keep the reference and pass it on. For a Foshan order that is normally the EU importer of record, not the factory.
The factory owns the answers and has no legal reason to keep them; the importer owns the duty and no access to the forest. A DDP term may change who clears the goods, but it does not create a plot coordinate. If a supplier offers DDP, ask who lodges the statement and get the reference in writing.
| Date | Milestone | What it changes for a buyer |
|---|---|---|
| 29 June 2023 | Regulation in force | The text applies; shipments are not yet checked against it |
| 31 December 2020 | Deforestation cut-off | Land cleared after this date disqualifies the wood, whatever a certificate says |
| 30 December 2026 | Medium and large operators | Statement required before release into free circulation |
| 30 June 2027 | Micro and small operators | One-off simplified declaration, with lighter geolocation rules |
| 30 December 2027 | Products added by delegated act | New CN codes enter scope |
A micro or small operator may use the plot's postal address. That relief does not pass to a larger importer buying the same goods.
Decision rule: before comparing quotations, write down who is the importer of record for each line. If it is your EU company, the supplier data belongs in the purchase order, priced and scheduled with it.
02Scope turns on CN codes, and furniture is on the list
Annex I is a list of CN codes, and the code decides whether a file is needed. A wooden bed frame is 9403 50, a chest of drawers or media unit is 9403 60, an upholstered dining chair with a wooden frame is 9401 61, and wooden furniture parts sit in 9403 91. Finish, price and brand change nothing.
Panels are listed in their own right: fibreboard 4411, particle board 4410, plywood 4412. A lacquered MDF wardrobe is in scope twice, as furniture and as board, and the fibre came from pulpwood plots that the board mill, not the cabinet factory, can identify.
| Item | CN code | In scope | Data the buyer needs |
|---|---|---|---|
| Upholstered dining chair, beech frame | 9401 61 | Yes | Species, plot and mill for the frame |
| Bed frame with slatted base | 9403 50 | Yes | Every solid timber component, including slats |
| Chest of drawers, MDF with oak veneer | 9403 60 | Yes | Board mill and veneer origin |
| Kitchen carcass, melamine-faced MDF | 4411 | Yes | Fibre origin from the board mill |
| Drawer box in plywood | 4412 | Yes | Plywood mill and veneer species |
| Powder-coated steel base | 7326 | No | None, unless timber is added |
| Upholstery foam and fabric | Not listed | No | None; the frame under it still counts |
| Single-use crate carrying the goods | 4415 | Excluded | ISPM 15 mark, not a statement |
Classification is a customs question. Ask your broker to confirm the code per line, then map the wood components under each code.
Decision rule: an RFQ without a CN code per line item cannot be checked for scope, and an answer of wooden furniture is not an answer.
Catalogue reference: how sourcing, inspection and shipping are coordinated — models, dimensions and finishes for the directions discussed above.
03Three fields carry the risk: species, plot, date
For EUDR timber, species means the scientific name. Rubberwood is Hevea brasiliensis, white oak is Quercus alba, black walnut is Juglans nigra. Walnut as a colour, oak as a finish and solid wood as a category are unusable, because none identifies a tree a forest officer can find.
The plot is a point in decimal degrees or, above 4 hectares, a polygon. Ask for six decimal places, about 11 cm on the ground; a coordinate rounded to two places lands in a village, not a compartment. A province or a supplier address is not a geolocation.
The date is the harvest window, and it must fit the plot and the species. A three-year range covering several compartments is a flag, because the cut-off of 31 December 2020 falls inside the trading life of most timber still in a factory yard.
A 40HQ holds 76.4 m³ nominal and 65 to 68 m³ usable, and a mixed order can fill it from six workshops using four species from three provinces. That is six data sets behind one statement, and the weakest one decides whether the container moves.
04The statement is the last document, not the first
A statement records the product, CN code, quantity, country of production, plot coordinates, harvest date and supplier, with the risk assessment behind them. It is entered in the Commission's information system on TRACES, and the reference number is what customs sees. Goods are not released into free circulation without one.
The sequence matters more than the form. The statement is created after the data is checked and before the vessel is booked. Teams that treat it as an export document find the gap at the port, with the factory paid and the container on the quay.
| Document | Issued by | What it must state |
|---|---|---|
| Species and origin sheet | Factory | Scientific name, country and province, share by component |
| Mill or board-supplier declaration | Sawmill or board mill | Species, volume, harvest period, plot list |
| Plot list | Forest owner or mill | Coordinates, area in hectares, polygon over 4 hectares |
| Timber purchase invoice | Factory's timber supplier | Volume, species, date and the link to the factory |
| Due diligence statement | Importer, in the information system | CN code, quantity, plots, reference number |
Keep the reference on the commercial invoice and packing list. A reference that lives only in an email is not traceable at the border.
Decision rule: no reference, no balance payment. A clause releasing the balance against the statement reference and the inspection report costs nothing and moves data collection before production.
05A certificate is not a statement
Chain-of-custody certification such as FSC or PEFC is evidence about a management system. It can support a risk assessment, but it is not a statement, it does not prove that a specific plot was not cleared, and it does not transfer the importer's duty.
Read the scope before crediting the certificate. It names species, sites and a validity period, and a mixed shipment can hold certified and uncertified timber on one invoice line. Ask for the scope certificate and the transaction record, then check the species and the mill against your order.
Deforestation-free is half the test. The other half is legality under the law of the country of production: land-use rights, harvest authorisation and the environmental rules that applied when the tree was cut. A forest management certificate does not answer a question about a land title.
Country risk changes the depth of the assessment, not the existence of the statement. The Commission benchmarks countries as low, standard or high. Decision rule: a low rating allows a lighter assessment, not skipped plot data.
06Where a Foshan order breaks the chain
The first break is commercial. The entity on the invoice is often a trading company, while the timber was dried and cut at a workshop two streets away. It can produce a business licence and a product list; it cannot produce a sawmill ledger. The audit question is who buys the timber.
The second is substitution. A sample is approved in American black walnut and production arrives in a stained hardwood that photographs well. That is a cost decision made quietly, and a compliance failure, because the statement was written around the sample species.
The third is panel board. A factory buying MDF from a distributor may have no route to the mill that pressed the fibre, and the mill may buy pulpwood from a pool. This is the hardest part of a Chinese order to document.
The fourth is time. A mill used for the sample is replaced for the bulk order, or a veneer species changes when a batch runs short. Decision rule: name the mill and the species in the purchase order, and require written notice and re-approval before any substitution.
07Clauses that turn a factory answer into evidence
A workable sequence has six steps, and each produces the record the next one depends on.
- Issue the data request with the RFQ, and make a complete answer a condition of evaluation.
- Record species, mill, plot and harvest window on the sample approval sheet, so the approved sample and the approved data are one document.
- Attach the data set to the purchase order, with the CN code per line and the name of the person who signs for the factory.
- Check the data before production: coordinates on a map, species against the drawing, mill against the timber invoice.
- Require the statement reference before the vessel is booked, and quote it on the invoice and packing list.
- File the whole set, including superseded versions, so a later query is answered from the record.
Decision rule: a supplier who can answer the species question but not the plot question is not yet a supplier for the EU market. That judgement is cheaper at quotation than at the border, where goods can be held or refused at the importer's cost.
The same record helps outside the EU. A US shipment needs no statement, but the Lacey Act declaration asks for species and country of harvest, and the two data sets overlap almost completely.
What your RFQ should state
- The CN code for each line item, confirmed by your customs broker, not the product family name.
- The scientific species name for every timber component, including veneer, slats and drawer boxes.
- The country and province of harvest, and the name of the mill or board mill that supplied the timber.
- Latitude and longitude in decimal degrees to six decimal places, with a polygon where a plot exceeds 4 hectares.
- The harvest date or range for each plot, consistent with the species and the delivery date.
- The timber purchase invoice linking the raw material to the factory named on the order.
- Written notice and re-approval before any change of species, mill or board supplier.
- Release of the balance against the due diligence statement reference and the inspection report.
Where this guidance stops
- This is a buyer's guide, not legal advice. Competent authorities in each member state apply the regulation, and their documentary expectations differ in detail.
- The application dates have been deferred twice. Check the Commission page and EUR-Lex before you plan a shipment, and do not rely on a date quoted in an article, including this one.
- A supplier declaration is not verification. Only the competent authority can validate a statement, and no sourcing agent can certify that a plot was not deforested.
- For panel-based furniture the fibre may be pooled across many small holdings; a mill-level answer may be the most detailed one available, and that limit belongs in your risk assessment.
- The EUDR governs imports into the EU. Great Britain, the United States and other markets have their own rules, and a statement for one destination does not satisfy another. Foshan Supply coordinates sourcing and document collection; we do not lodge a due diligence statement or certify that a plot was not deforested.
Questions buyers ask
Does the EUDR apply to furniture made in China?
Yes, where the item falls under a CN code in Annex I. Wooden furniture sits mainly in 9401 and 9403, including parts, and MDF, particle board and plywood are listed in 4410, 4411 and 4412. Upholstery fabric and foam are not listed, but a chair with a wooden frame still counts.
Who has to file the due diligence statement?
The operator who first places the product on the EU market, normally the EU importer of record. After the December 2025 amendment, businesses down the chain keep and pass on the reference instead of filing. A supplier selling DDP does not automatically take on the duty, so confirm who lodges it.
What geolocation does a furniture factory have to provide?
A point in decimal degrees for each plot, or a polygon where the plot is larger than 4 hectares, with the harvest date or range. Ask for six decimal places, about 11 cm of precision. A province, city or supplier address is not a geolocation, and will not support a statement for a medium or large importer.
Is FSC certification enough for the EUDR?
No. Certification supports a risk assessment, but it is not a due diligence statement and does not prove that a specific plot was free of deforestation after 31 December 2020. Use it as one input, check that its scope names the species and the mill in your order, and still collect the plot data.
When does the EUDR start to apply?
For medium and large operators, 30 December 2026. For micro and small operators, 30 June 2027, with a one-off simplified declaration. Products added to Annex I by the 2026 delegated act apply from 30 December 2027. The dates were deferred in December 2024 and again in December 2025, so confirm before booking.
What if my supplier cannot provide plot data?
The statement cannot be completed for that product, so the choice is commercial: change the species or supplier, buy from a mill that holds the data, or accept that the goods may not clear. A risk assessment that acknowledges a gap does not replace the missing field. Decide before production, while the leverage is yours.
Does the EUDR cover MDF, plywood and veneer?
Yes. Fibreboard, particle board and plywood are listed in Annex I, and veneer falls under the wood product codes. The traceable unit is the mill that pressed the board or sliced the veneer, and the plots are the pulpwood or log harvest areas behind it. A cabinet factory buying board through a distributor needs that mill-level data.
Sources
- EU Deforestation Regulation (EUDR) — overview, application dates and legal texts — European Commission, DG Environment
- Regulation (EU) 2023/1115 on deforestation-free products (consolidated text) — Official Journal of the European Union
- IPPC ISPM 15 — Regulation of wood packaging material in international trade — International Plant Protection Convention
- Incoterms 2020 rules — International Chamber of Commerce
- Importing into the United States — entry, classification and admissibility — US Customs and Border Protection
- Harmonized Tariff Schedule of the United States — US International Trade Commission
- SOLAS verified gross mass of a packed container — International Maritime Organization
Pages related to this guide
How this guide was checked
- Written from the public catalogue, the standards and regulator pages listed under Sources, and the process records described on the services page.
- Catalogue references and model details were checked on 2026-11-05; 7 primary sources are linked above.
- No supplier paid for placement. No price on this page is an offer; ranges are planning references and must be confirmed in a quotation.
How these guides are researched and reviewed · Corrections policy
